There are important considerations in setting up fencing structures on all sides of your property. Fences are built to ensure protection for homeowners. This wall can also serve as additional ornamentation to bump up the appearance of your front yard. Yet, it is not easy to choose the appropriate fence so you must pore over several concerns before going on with your construction.
Spell out your reasons for erecting this containment. It may be for security or privacy. Also, the fence can be a restraint for kids and domestic pets. Check the building code provisions and policies of the neighborhood association. Secure required permits from the local engineering office. Be sure about your boundaries to stay away from any problems with your next-door neighbors.
Try to obtain the services of an inspector to take necessary measurements. Notify your neighbors as a sign of politeness. Concrete or steel fences may be good choices to provide you absolute privacy and shelter from natural elements. These are sturdy and fire-resistant but are not rally suitable for beautiful landscapes. Privacy screens are fabricated from wood. These are also becoming popular in various communities.
Nevertheless, you have to match these carefully with your house design. It is also sensible to hear out the suggestion of your contractor before selecting this model. Once you have done all these steps, it is now possible to start building the structure. The most difficult part of the installation is to dig the potholes. However, the difficulty depends on the span of your structure and type of soil. You can always use sophisticated tools like the gas-powered digger if you have a lot of holes to excavate.
Bury the wooden or concrete column. Adjust the height so the substructure of the stakes will be two to five inches higher than the ground. Put in at least eight inches of soil in the hole. Examine your fence post for uprightness using a carpenter’s level by holding this against the two flanks. Once the pillar is perpendicular, compress the soil around the post with a metal bar. Add another eight inches of soil and check the level. Repeat the procedure until the pothole has been filled up.
Take the measurement from the post to the first corner of your fence. This is where you plunge s picket into the ground. You can make the markings and dig the remaining potholes. Set up the remaining posts so you can finish the rest of the containment.